Lantronix XPORT DIRECT PLUS DEVICE NETWORKING MODULE, NO RJ45 JACK, BULK, RoHS – XPDNC2000-01

Lantronix XPORT DIRECT PLUS DEVICE NETWORKING MODULE, NO RJ45 JACK, BULK, RoHS – XPDNC2000-01

  • Powerful and affordable networking for any device with a serial interface on its microcontroller
  • Integrated module with RJ45 and dedicated networking SoC
  • Web server, TCP/IP protocol stack and Windows deployment software
  • Up to 921 Kbps data rate
  • Compact low profile (<12 mm)
  • 2 x 12 pin, 2 mm headers
  • Three GPIO pins
  • RS-232/RS-485 ready
  • 256-bit AES encryption for secure communications
SKU: XPDNC2000-01Category:

Description

The compact XPort Direct+ is an embedded device server module delivering high-performance Ethernet connectivity and web server capabilities.
Manufacturers of high-volume, price-sensitive products can now rapidly and even more affordably web-enable virtually any device with a serial interface on its microcontroller. With this capability, OEMs can offer remote access and control over the Internet as a standard feature in their products.

Economical Platform for High-Volume Deployments
This ready-to-use solution is built on the same time-tested and market-proven technology offered in the successful XPort. With its low cost and powerful functionality, XPort Direct+ is ideal for high-volume product deployments where low-cost, limited functionality host microcontrollers traditionally create a barrier to network-enablement.

Building automation (lighting, etc.)
Consumer electronics
Energy/metering applications
Home automation (high-end audio, alarm panels, etc.)
Point of sale (POS) products
RFID readers
Sensors and controllers
Vending machines
White/durable goods

Integrated Network Communications Module
XPort Direct+ acts as a dedicated co-processor module to optimize network activities, permitting the device’s host microcontroller to function at maximum efficiency. Serial data from the device microcontroller’s CMOS logic-level serial port is packetized and delivered over an Ethernet network via TCP or UDP data packets. Similarly, incoming TCP or UDP packets are unbundled and presented to the attached device over its microcontroller’s serial interface.

XPort Direct+ features a built-in web server for communications with a device via a standard Internet browser. Web capability can be used for remote configuration, real-time monitoring, upgrades and troubleshooting. XPort has 512 KB of on module Flash for web pages and firmware upgrades.

This fully-integrated and ready-to-deploy module also includes a 10/100 MAC/PHY, 256 KB of SRAM, and an RJ45 jack with magnetics, and 256-bit AES encryption for secure communications. Easy to embed, this device server module enables engineers to focus on their core competency while reducing development time and cost and increasing product value.

Feature-Rich Software, Easy Configuration and Deployment
Eliminating the need to negotiate the intricacies of Transmission Control Protocol (TCP) or Internet Protocol (IP), XPort Direct+ incorporates:

Robust embedded operating system
Full-featured network protocol stack
Proven, parameter configurable, ready-to-use serial-to-Ethernet application
Built-in web server for device communication and configuration via a standard browser
256-bit AES encryption
The Windows-based DeviceInstaller makes configuring one or more XPort Direct+ modules in a subnet quick and easy.

Install and configure XPort and load firmware
Assign IP & other network specific addresses
Set wireless parameters
Load custom web pages and view specific device data
Enable web-based configuration of the device
Ping or query the attached device(s) over the network
Allow Telnet communication with the device(s)

Reviews

There are no reviews yet.

Be the first to review “Lantronix XPORT DIRECT PLUS DEVICE NETWORKING MODULE, NO RJ45 JACK, BULK, RoHS – XPDNC2000-01”

Your email address will not be published.

Menu